Need SONY KV-5100 Antenna Part #
Can someone tell me what the Sony OEM part # is for the Telescopic Antenna on a 5" Trinitron KV-5100? Did the KV-5000 and / or other models use the same antenna? Trying to source a replacement.
Thanks! |
IIRC they used a stud rod. If the base is OK & its a stud
type you can use a rod off the common AN18 ( IIRC part # ) 2 antenna plug in ears. They were used on almost all 12" & above color sets in to the 80's. A picture would help also...... 73 Zeno:smoke: |
...
|
I don't have the TV in front of me so no pictures as yet. I do know it's wider in diameter than most and it fits into a sort of socket that allows the rod to rotate.
|
Quote:
|
...
|
Once upon a time I had that antenna from a set I scrapped...I can't remember what became of it, but I did give much of that set's remains to user Arcanine. It might be worth checking with him.
|
Union Electronics (UED.net) was the last to have them - Russell Industries made a replacement, POR-10H. Note that all the Sony numbers for 7 or so models all cross to the same part number, 1-501-156-99 or 1-501-156-XX (XX=don't care in Sony lingo...).
https://www.ued.net/ued/viewItemActi...e=SNY150115100 I have one of the POR-10H, New in the package...$22 + Shipping. PM me if interested. BTW, most appearance parts were dropped by Sony after 3 years, thanks to the cancellation of the FTC "life or 7 yrs" rule" from the 60's... Sony stocked electronic parts sometimes for more than 20 years past their prime - the SG-213A is an example - deleted in the early 00's. Cheers, |
Quote:
|
All times are GMT -5. The time now is 11:35 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.