Predicta Debutante restoration
I got a pretty good Christmas present this year - a Predicta Debutante in black with original stand :)
It is in very good cosmetic condition and was a reasonable price - especially for coming from an antique store. Here are some preliminary photos. I have not taken a look in side or tested the CRT yet. Here it is in the shop. https://farm8.staticflickr.com/7838/...4586f5ec_c.jpg Now at home in the garage. https://farm5.staticflickr.com/4813/...f6be4110_c.jpg https://farm8.staticflickr.com/7895/...e11d4b24_c.jpg https://farm5.staticflickr.com/4831/...c7090430_c.jpg I found this sticker on the side. https://farm5.staticflickr.com/4889/...fe8455c8_z.jpg |
Sweet!
|
That's a nice-looking set. I'm looking forward to see the progress!
|
Nice find Bob. It's just about in the condition of mine. The stands metal parts have a very thing gold electroplate that comes off easily with any abrasive. It's interesting that yours is a typical brown/black color, yet was apparently a "hotel" model with that sticker and antenna delete. Normally those are ID'd by the cream-colored cabinets.
|
Someone must have been a good boy this past year, Sweet gift
Gregb |
Quote:
|
Now that you mention it, the one I restored a couple years ago was black too
Here's a first look inside. Aside from the tubes, it might be all original. Hard to tell with all the dust. https://farm8.staticflickr.com/7813/...83e2a18d_c.jpg https://farm8.staticflickr.com/7855/...4f187f37_c.jpg https://farm8.staticflickr.com/7893/...013d2d28_c.jpg The 17DRP4 came up into the green after a few minutes :) Good cutoff response too. https://farm5.staticflickr.com/4876/...a2f1c32e_c.jpg https://farm8.staticflickr.com/7861/...7de52c45_c.jpg |
I decided to throw caution to the wind and try a power up with a Sencore PR57 set to 117 VAC.
Tubes lit up right away. https://farm5.staticflickr.com/4804/...614200d7_c.jpg After a short while, I heard the speaker crackle and a raster appeared. The vertical slowly grew a bit. I suspect B+ is low due to leaky power supply caps. Rotating the tuner would cause some video and audio noise, but couldn't tune anything in Once I get a couple projects cleared off the bench, I'll start with replace the power supply components and try another power up. https://farm8.staticflickr.com/7925/...a5f53257_c.jpg https://farm5.staticflickr.com/4862/...4a2dd034_c.jpg |
All times are GMT -5. The time now is 09:46 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.