Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Antique Radio (http://www.videokarma.org/forumdisplay.php?f=16)
-   -   My new 1965 zenith clock radio (http://www.videokarma.org/showthread.php?t=269873)

LADR 12-13-2017 03:33 AM

My new 1965 zenith clock radio
 
1 Attachment(s)
For the grand total of $18 on Ebay, I don't think i did that bad. Model L519 and chassis 5L07, the chassis is, of course, point to point hand wired(typical zenith). Of course it didn't come without shipping damage 3 out of 4 corners were broken but no big deal. The seller said the clock and radio works and sure enough, they work like new(typical zenith). Opened it up yesterday and VERY dirty. Has all original 1965 dated zenith tubes one RCA replacement and all tested good. This is my new favorite clock radio by far, i love it.

Bogframe 12-13-2017 03:39 AM

Very cool~

dieseljeep 12-13-2017 09:49 AM

Quote:

Originally Posted by LADR (Post 3193369)
For the grand total of $18 on Ebay, I don't think i did that bad. Model L519 and chassis 5L07, the chassis is, of course, point to point hand wired(typical zenith). Of course it didn't come without shipping damage 3 out of 4 corners were broken but no big deal. The seller said the clock and radio works and sure enough, they work like new(typical zenith). Opened it up yesterday and VERY dirty. Has all original 1965 dated zenith tubes one RCA replacement and all tested good. This is my new favorite clock radio by far, i love it.

A friends father bought one a little newer, possibly a Y or Z model, AM 6 tube with an RF stage. Upright chassis design with the original shipping carton. Naturally, now it needs an electrolytic.
The strange part is the return address on the carton states "Wincharger Corp". I know, Zenith owned them but I didn't think that they still built product there.
I have a few Zenith clock radios, but they're all AM-FM. I also have one from the mid-50's, where Zenith tried printed circuitry in a tube radio. :sigh:


All times are GMT -5. The time now is 04:50 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.