Admiral Regent/C322C2 Score!
5 Attachment(s)
Snagged this guy for $500 up in Ocala. 21AX tests good at first look, but I still need to let it cook for awhile. Cabinet is in remarkable shape too. It's missing most of its tubes and is covered with a thick layer of dust. Checked the flyback and there definitely is some wax drip, but I dont think that is a cause for concern. Uses the 29Z1 run 18 chassis. I probably wont really be able to get to this one till I finish the 4. I dont dare power it up until I replace the filters. I'll get the camera out and take better pictures here soon. Make that 9 surviving examples!
|
6 Attachment(s)
Started to remove the layers of dust in the CRT areas. Set is confirmed to be from from 56' due to matching tube dates on the hv tubes and the crt. Chassis seems about 95% original. Flyback primaries ohm out good.
|
6 Attachment(s)
More photos
|
Fantastic find ! You da man:thmbsp:
After the filter cans take it slow. Get a raster up THEN slowly recap starting with problem areas. Sry you know the drill...... 73 Zeno:smoke: LFOD ! |
Very nice. And if you save those bumble bee pulls and sell them on eBay, you might just pay for the set......:D
http://www.ebay.com/itm/585-Sprague-...p2047675.l2557 :screwy: Those audiophiles.... |
6 Attachment(s)
Continued to clean the set up. Let's do the safety glass next. I am pleased with how it came out. There is so much dust built up in this set!
|
Awesome rare set. It almost looks like it's a console, missing the legs. Can't wait to see the restoration in this set! I'm still trying to finish my RCA Westcott like yours.
|
Quote:
|
Very cool indeed. 61 year old set, who wudda thunk they would still be around and of interest to anyone?
Nice... |
Yes! Great score, looking forward to many more progress pictures on this restoration, very nice start, chassis looks un-molested, isn't rusty, CRT usable, large "plus-es!"
|
3 Attachment(s)
Now to remove those proverbial, pesky white latex paint specks! Turned out pretty good I think. Some tiny specks just wouldn't come off though!
|
Congratulations on acquiring this rare guy.
|
4 Attachment(s)
Thanks everyone! I went ahead and did some more work on the cabinet. Next I added restor a finish to the top and left side of the cabinet. The results are really nice.
|
I cant seem to find the getters on the 21ax. I know they are normally located in a slot on the neck near the end of the gun assembly, but I cant seem to find it. I do see what looks like silver getter material in the base though near the heaters of the guns. Were the getters ever placed inside the base of the tube rather than on the end of the gun? :scratch2:
|
It does indeed look like getter flash in the base of the tube.
|
All times are GMT -5. The time now is 09:48 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.