Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Solid State CRT Televisions (http://www.videokarma.org/forumdisplay.php?f=184)
-   -   Toshiba 27AF44 - Jitter/Interference (http://www.videokarma.org/showthread.php?t=270360)

grossbard 04-19-2018 01:18 AM

Toshiba 27AF44 - Jitter/Interference
 
Hello,

I picked up a used Toshiba 27af44 from craigslist and I noticed that it has this "jitter" interference on the screen. It happens on all inputs and I tried an SNES and a PS2 and they both showed the same type of jitter. What could be the cause of this? Here are a few videos of the problem. It was kinda hard to capture with my phone camera but hopefully it will give you some idea of what the issue is.
thanks.

https://drive.google.com/open?id=1Rt...VngN1PzEyVjYKa

https://drive.google.com/open?id=1s_...iGyV8cC3AFByWv

zeno 04-19-2018 06:44 AM

Most likely the power supply isnt regulating its pretty subtle
so wont be easy to find. A photo of the back or the chassis
would help as Toshiba went from building there own to having
Orion A.K.A. Emerson build them. Also if it has a chassis number
post that, format is TAC-####
Good Luck

73 Zeno:smoke:
LFOD !

Zenith26kc20 04-19-2018 08:56 AM

That model has a number of small capacitors in the power supply. I've seen a lot of strange problems when one or more open.

grossbard 04-19-2018 10:15 AM

Here is a picture of the back:
https://i.imgur.com/Sffwt1Vl.jpg

I had a feeling it might be capacitor related. Do you guys thinking recapping will fix it? I'd like to keep this TV, it'd be great for my retrogaming setup. Other than a slight tilt, it has the best geometry I've seen from a consumer level flat CRT, and I've had a few in my time...

dieseljeep 04-19-2018 10:43 AM

Quote:

Originally Posted by zeno (Post 3198420)
Most likely the power supply isnt regulating its pretty subtle
so wont be easy to find. A photo of the back or the chassis
would help as Toshiba went from building there own to having
Orion A.K.A. Emerson build them. Also if it has a chassis number
post that, format is TAC-####
Good Luck

73 Zeno:smoke:
LFOD !

I have an Emerson that was made by Funai, a 20" around the same age.
I have an older Toshiba 19" table model ca 1990, assembled in USA that has an RCA CRT and a Gold Star chassis. :scratch2:


All times are GMT -5. The time now is 03:36 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.