Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Diagnostic & Test Equipment (http://www.videokarma.org/forumdisplay.php?f=177)
-   -   B & K 465 crt tester (http://www.videokarma.org/showthread.php?t=270237)

tv’s r us 03-13-2018 04:35 PM

B & K 465 crt tester
 
I have 3 B & K 465 crt testers. All 3 will test the same tube different. Is there a way you check the tester? Calibrate it maybe? Thanks for your help.

Electronic M 03-13-2018 06:48 PM

Look around sor the service manual for it. Some tester repair manuals have calibration proceedures in them.

Notimetolooz 03-16-2018 07:39 PM

I have a 465 and the manual.
The only adjustment in the manual is a 20K pot that calibrates the meter using the heater voltage while monitoring the voltage with a known good voltmeter. Everything else depends on the accuracy of the resistors. However from some further testing I've done, the meter emission "GOOD/BAD" corresponds to 300 uA with the meter switch set to normal, and 40 uA with the meter switch set to sensitive. I used a 1.5M pot in series with a sensitive ammeter across pins 10 and 11. Those pins will have about 300V across them with G2 at max.


All times are GMT -5. The time now is 02:31 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.