Found an early 1950s Zenith AM/FM Clock Radio at Goodwill today!
2 Attachment(s)
Hello everyone today I found an early 1950s vintage Zenith AM/FM Clock Radio Model J733 at Goodwill where I work for $6 and some change after I used my loyalty dollars on it (it was originally $20.) Anyways it still works without humming and everything the only thing that doesn't work is the clock mechanism which contains a Telechron movement and I happen to have a spare Telechron rotor laying around that still works that I can install in it to make it work again. Anyways I'm planning on using it as my primary alarm clock to get me up for work, because its just so cool. Also the bakelite cabinet is crack free but does need a good polishing, any suggestions as to what to use to polish the cabinet with?
Pictures of the unit posted below. |
I've got the all blue version of that and have been using it as my morning alarm for several months.
The only thing that annoys me is that it's FM tuning drifts for ~20min after warmup, and the only strong stations (which it won't drift out of tune on) that play good music have gone over to Christmas stuff for the season, and as much as a bit of festive music is nice, if I had to wake up every morning to it I'd be found hanging from the ceiling fan one morning or my radio would get destroyed... If this model had AFC that feature would be worth it's weight in gold to me. I've considered AM, but I don't want to wake to talk, and I suspect the one music station is too weak to survive drift... |
Quote:
Replace the ceramics in the oscillator and FM Converter section with NP0(C0G)ceramic discs for lower drift. Surprisingly, silver micas fail to prevent the drift.... IIRC, it was hard finding all the pF values at one vendor.. |
Quote:
|
I was thinking about 'borrowing' an AFC circuit for another model.
Quote:
ATM my radio is way at the bottom of a massive list of projects....I may mod it in time for next year's Christmas music switch though. :tongue: |
Quote:
The stations and their Arbitron ratings. Many times around the first of the new year there is a format change. I hope, it's a change for the better! :yes: |
The question is if they will move towards the TOC or towards the same modern crap they've been moving towards (some of it was decent, but a LOT just ain't my thing)....One thing I wish they would do is can their morning hosts...About a week in to using them I renamed their "Murphy & Meg in the morning" music+idiots chatting show to "Murphy and Meg are ANNOYING"....It seems like there is more yaking then music.
it occurs to me there is a big alarm controlled power outlet on the back...Maybe I should just set it to run a audio player of some format so I can program my own wake up music. |
Looks like 95.7 is sitting on top of the heap... I would not expect major changes.
http://ratings.radio-online.com/cgi-bin/rol.exe/arb043 The shift over time is likely to be toward newer tunes, to stay centered in whatever their target demographic is. jr |
How did this thread go from talking about a 1950s Zenith Clock radio to discussion about radio stations and what they do and do not air?
|
Quote:
It's been a little dry, regarding new topics. It's a good thing that there is a few members that are sharing their experiences with their projects. :thmbsp: |
Quote:
|
Quote:
The coil and laminations are known as the "field". Remove the field and rotor assembly and see if the pinion gear is turning. The output speed is 3.6 RPM. |
Quote:
|
UPDATE: finally got the tuner fixed, apparently 5 was the magic number as far as the number of times I had to go around the tuning knob pulley before going back to the main tuning capacitor pulley, which is odd because I've never seen a tuner stringing that required you to go around the tuning knob 5 times before. anyways, when I got the radio put back together I tested it out and the tuner was drifting really badly and also it would barely pick up any stations on the FM band except the really strong local stations.
So I took the radio back apart and checked all of the tubes in my tube tester and all of the tubes checked out fine except for a Raytheon 12AU7A tube that was obviously a replacement/substitute for the original 12AT7 tube in the radio, that tube was completely dead (no heater/filament glow whatsoever), so I replaced the tube with a correct 12AT7 tube that was a Telefunken branded tube and then put a new shield over the tube as the shield they had over it previously was just a cardboard tube that was painted silver, and then put the radio back together reattached the built-in antenna and fired up the radio and sure enough it was working perfectly again as far as reception goes, no drifting, and it was picking up more stations than before on the FM dial. Also I saw a date stamp on the radio chassis that dated the radio to 1962 (which I'm not sure if that's correct or not or if maybe the ink smudged just enough to make a 5 look like a 6) but either way it seems that I have this radio up and running again. |
OK so what should I use to replace the old dry-rotted rubber gasket material that went between the clock dial glass and the cabinet? I was thinking of using that rubber tire patch material that comes in 2" strips for patching holes in tires temporarily, but want your guys' opinion as well, as far as what I should use.
|
All times are GMT -5. The time now is 09:53 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.