My new Zenith 25EC58!
3 Attachment(s)
Got this from a friend and local collector. We've been discussing trading this set for that 1955 Zenith highboy for months. Today it finally happened. I was so happy to see that highboy go. It was a total basket case. This thing however, works perfectly. After I Clean & Balanced the CRT, the colors and focus absolutely came alive.
|
2 Attachment(s)
Oh man, this one's nice! Much more interesting than most flats. I see it has the Setronic 7 control panel, very cool. What kind of CRT is in it? I wasn't aware of any flats with a dark-matrix CRT.
I just took a closer look at the cabinet. Is there actually wood in there aside from the top? Some info on the Setronic 7: |
I like that set. Can we see more of the control panel? I don't think I have seen one like that before.
|
When I get back, I will definitely show more of the control panel. One thing that bugs me about it is that there is no standby position on the Setronic 7. The light is always illuminating one of the adjustments.
|
What I would do in that case is put a piece of black electrical tape over the bottom half of the color level indicator and consider that the slider's default position. It would be an homage of sorts to the color broadcast light on the early rectangular color Motorola and Magnavox sets.
|
Quote:
Basically EVERY flat chassis SS Zenith has a 'balck matrix' "Chromacolor" CRT. |
I meant the glass looks a lot darker than that of any Chromacolor CRT I've seen.
|
1 Attachment(s)
Here's that control panel. Unfortunately, both bulbs for the channel select are burned out.
|
Quote:
Tinting of CRT faces and or safety glass goes back to at least the early 50's, and never entirely went away (though popularity would fluctuate). *You are right that IS uncommon...I did not initially notice it. |
Quote:
|
You just slide the slider until the adjustment you want to make is illuminated. Then you push the knob and turn. Just like a normal control.
|
Well I've already hit my first problem with this thing. The blue G2 control is messed up. It's either full on or full off. No in between. Hopefully a shot of contact cleaner will fix it. It's impossible to do good greyscale in these conditions.
|
Could be a break in the carbon track too.
|
1 Attachment(s)
Somehow I was able to get the blue G2 right where it starts to go full open, but stopped. It now has perfect greyscale and the colors on this TV are absolutely amazing. Hands down one of my best looking TV's in terms of picture quality.
|
G-2 control fails were common from the 4 tube hybrid
through the upright CC 2 chassis. All same values but one had solder lugs & CC2 used spades that go into terminal strips. Chromacolor goes back to late 68. Black matrix with smaller dots. Over the years more HV up to 30KV, smaller dots & darker screen glass for better blacks & contrast. CC tubes worked down through the 19" hybrids and the 16 & 14 tube sets as a step up option. IMHO the control area was the best looking non-remote panel. IIRC only on some E & F consoles IIRC. Slider has a small hole in it for chromatic adjustment. Came with a plastic screwdriver. IIRC lamps can be changed from front. Pull knobs then a few phillips. Probably #159 or #259 in Zenith tradition.... 73 Zeno:smoke: LFOD ! |
All times are GMT -5. The time now is 10:38 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.