Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Diagnostic & Test Equipment (http://www.videokarma.org/forumdisplay.php?f=177)
-   -   Telematic color jig help (http://www.videokarma.org/showthread.php?t=269882)

stromberg67 12-15-2017 03:18 PM

Telematic color jig help
 
1 Attachment(s)
Hi, I was generously given a Telematic/RCA color jig, and found two wires on the yoke adapter Molex connector broken from the pins :tears:. The colors are orange and gray. Can anyone identify which pins those wires go to :scratch2:? Crude hand drawing attached. Thanks, Kevin

Kevin Kuehn 12-18-2017 09:29 AM

Hey Kevin,

I don't have specifically the info you're asking asking for, but have you seen the below ARF thread? Can you tell anything from the pictures Brian(Findm-Keepm) posted? Otherwise you could look at the wiring on the back(inside) of the jig connector, because I would think everything would follow straight through. Otherwise drop Brian a line and I'm sure he can set you straight.

http://antiqueradios.com/forums/view...p?f=3&t=308119

stromberg67 12-18-2017 11:59 AM

Thanks Kevin. The ARF post is a big help. After the holidays I'll open the jig and compare the wiring on the female Molex. Shouldn't be too hard to figure what's what. I also have a CK-3000, but no adapters for that one. Many for the RCA.
Thanks again! :thmbsp:
Kevin G.


All times are GMT -5. The time now is 05:24 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.