Overclocking!
|
What did you do to overclock the machine exactly? Are you switching in a different crystal?
|
Yes, I installed a 4-pin crystal oscillator. It outputs the same exact type of pulse the 68k normally accepts.
|
Pretty neat. You taught me something to day. Didn't know the sega ran sound off z80 and it use the other processor for graphics.
|
The Genny was loosely derived from Sega's 1985 "System 16" arcade board, and in arcades "68k for graphics and Z80 for sound" was nearly ubiquitous from the mid-80s through the early 90s. The SNES also has a second CPU for sound; their sound CPU and sound processor were designed for Nintendo by Sony's Ken Kutaragi, who later used beefed-up versions of that sound chip in the PlayStation and PS2.
|
The 68k also did the game engine too.
The system 16 uses a 10mhz CPU. This is why I chose a 10mhz overclock. So my genesis is essentially as fast as a true system 16. Though it still has a weaker graphics chip. |
I may have to try this on my VA7 Genesis, since I'm planning to take it apart and do the 'crystal-clear audio' mod to it anyway.
I'm a little curious about the region mod, though... is there some particular reason you went with two switches, rather than a SP3T? Or is it just that you didn't have a SP3T laying around? |
I went with the two switches because there is actually a 4th region, which entails JAP/50Hz. I don't think any games support it, but I didn't think about it until after I made the mod.
|
All times are GMT -5. The time now is 07:45 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.