TR-1020P not recieving properly after recapping
 

Finished recapping my TR-1020P, and i discovered that it is having reception problems. it'll pick up one of my transmitters on channel 16, all across the UHF band all the way up to channel 60. If i try my computer meanwhile, on channel 25, i get nothing but static. This issue has started happening after a complete recapping of the set.


what can i do to fix my set? I double and triple checked the solder joints and everything looks good to me.

I FIXED IT! turns out with a double check of the service manual, there was a very hard to find broken joint...