|
WD-40: just spraying from the can to the control would get too much in there. What I mean is to take the lid off the can and spray some into the lid as a container, then dip from the lid with a toothpick, etc. You could even dip with the red tube that comes with the WD-40. There are fancier control cleaners but this works OK for me. No, don't spray anything into the IF cans!
__________________
Reece
Perfection is hard to reach with a screwdriver.
Last edited by Reece; 07-26-2010 at 08:07 AM.
|