Quote:
Originally Posted by Ed in Tx
So you went 1 to 2, 1 to 3, 2 to 4, and 3 to 4 and all tested like a good diode? Then it's something else...
|
Yes all good.
Ive tested all the diodes in the HOT zone, all the transistors bar Q4, replaced a few capacitors that I had on hand. I must be missing something or measured something wrong.
When I measure DC voltages past the rectifer I only get about .5V
When i measure AC votages at the mains I'm only getting 1-2V coming in from the hot and neutral pins
I'm close to giving up on this and taking a loss. which is a shame because otherwise the VCR looks barely used.