View Single Post
  #19  
Old 07-06-2016, 11:04 PM
dr.ido's Avatar
dr.ido dr.ido is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: SE Melbourne, Australia
Posts: 527
It is fine to replace the 10V caps with 16V caps. The zener diode will read close to 0 in both directions if it is shorted. Otherwise it will read around 0.7V (using the diode check range on a digital meter) in one direction and open in the other. In circuit other components around it can effect the reading. If you're unsure unsolder one side of it and test again.
Reply With Quote