I cleaned up the chassis and started recapping it.
I've done all the paper caps on the PC board and a few on the front of the chassis, no electrolytics and there are probably a half dozen paper caps left, mostly .1 which I am out of.
The yoke cover on this one is as bad or worse as the last one, there is literally nothing left of it except the metal clamp and centering rings, I'll have to figure out something to hold the yoke in place.
Anyhow, it's looking pretty good and the sound is strong! the set was partially working to start with so that makes it easier usually.
I had the yoke on upside down so I rotated the picture, that's why the kitchen counter is on top.
