|
If you can't find one, what you could do is remove it, clean it up, and scan it. Be very careful cleaning as the paint can come off. Use plain water and try in one corner first. Scan it and Photoshop (or other program) the crack out of it. Make test prints on plain paper to make sure the size is the same as the original. Dump onto a flash drive and take it to Kinko's or = and have them print it on clear plastic. Sandwich the plastic between two pieces of acrylic such as used in storm doors. Seal the edges with aluminum tape. I've done the same to save a bad dial glass and it came out fine.
__________________
Reece
Perfection is hard to reach with a screwdriver.
|