ALL caps are suspect after another remote session today. I hope you have a good cap checker that has leakage & rated voltage like the Sencore. Check at the linearity coil. Brown caps were all leaking at 200V & 600V ratings. Try not to use any yellow caps in the AC current circuits.
HV bypass is OK but not current. I know, as see you are using Orange Drops, but I am speaking to the uninformed.
BTW same tangled mess in the pot.
I guess your yoke is OK or is that another one?
Keep us posted!
Quote:
Originally Posted by Tellyrescue
Good tip on the disc, never though to check it.
I had to replace the horizontal width pot as the fine wire was all tangled up inside and believe it shorted out taking the resistor on the back of it and the horizontal winding on the original yoke with it.
I also replaced the two caps in that area. I now have HV but it needs to be reduced.
|