|
do not use heat (other than sunlight) to remove the lens. Its not needed for yours. Heat with a heat gun works but is much more dangerous IMHO. The main thing is not to rush it and not to hear or cool rapidly. even in sun heat I put in shade to let it cool down. NEVER use water to clean if tube is hot.
I have a 23V rectangle that has been sitting out in the weather for over a year now, Still in its foam case, with a hole dug out and a funnel in the hole right over the junction of the lens to CRT face. Grease on the pins and anode to prevent corrosion.
I was thinking of putting down a soft towel, put the CRT face down and cover with dirt to let the microbes have a go at it. Low damp area to really get the most out of it.
Last edited by DaveWM; 06-01-2016 at 02:21 PM.
|