|
I think so too. Pin 7 on the 6je6 is high by about 30v but I've got -46 on the grid so I think I'm getting good drive. All voltages on the osc are normal. I'm going to pull the chassis again tonight and recheck everything. I did swap those tubes and I've got 370 on the damper.
Thanks again for all the suggestions. It never hurts having other input. The fact that it became progressively worse over several hours sure does point to a component failing. I haven't check B Boost and I probably should. Vert is normal and the screens are OK as well so I just "assumed" it was good. And we know what assuming does. :-))
Fred
|