Quote:
Originally Posted by zeno
OK the raw 125 VDC goes through interlocks on the
modules then to the FBT pin 4. You want to brake it
there. it is USUALLY a red or orange wire on a Zenith.
The pin you show looks like pin 9. Check the terminal guide
in the Sams.
73 Zeno  |
Are you talking about a lead on the underside? The leads on the FB are inaccessible and go through hole to the underside. Their colors are yellow, green, purple and white w/red stripe. Those go under the chassis and are soldered to different points.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|