Quote:
Originally Posted by zeno
OK the raw 125 VDC goes through interlocks on the
modules then to the FBT pin 4. You want to brake it
there. it is USUALLY a red or orange wire on a Zenith.
The pin you show looks like pin 9. Check the terminal guide
in the Sams.
73 Zeno  |
Okay, here's what I got. The FBT (T207) is fed via wires from the bottom. From there the wires coming out of it are bare. They connect to points on a white board I'm assuming to be the "terminal" board. I am attaching pics of the board, the terminal guide and the layout of the FB from the SM. I'm hoping from this we can identify exactly which wires need to have the bulb between them. I can see that the focus lead is tied to point 11 of the guide. And it looks like 9 goes back and feeds the collector of the HOT.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Last edited by TinCanAlley; 09-25-2013 at 02:10 PM.
|