I got 615 ohms between the plate of the 25L6 and the cap of the 1B3 rectifier, so that is a reading between the primary and secondary windings. Specs call for around 630. Eyeballing the transformer with a flashlight I dont see any carbon tracing or damage. I will have to pull out the ol blue anatek ring tester.
I tried measuring the voltage at pin 3 of the 25L6 which is the plate, half the tubes are removed so there should be no current draw, I saw it shoot to 25V or so DC, and it slowly falls. while plugged in.
So I have to do some investigating thats for sure.
|