Quote:
Originally Posted by albanks
rubbing alcohol works for me. There is about a 1"by2" area missing DAG, I put a piece of electrical tape over it. DAG seems expensive. Do I need to buy some just to coat this small area? The reason I am cleaning the gunk near the HV is the occasional pops and hisses which I guess is the arkover.
|
A picture would help... blind advice is don't put any day closer than 1.5" to the HV connection, and any piece smaller than a dollar missing is okay as long as there are no islands. All dag must connect to all other dag any unconnected islands must be connected with a conductor (ideally another layer of dag) or removed... islands arc to each other and that is very bad.
Slip Plate was under 15$ on wallmarts website last I checked...it makes a great dag substitute.