|
Good info. I am sure the Zenith is okay as I scoped the crap out of it and never had an issue. Also, I only clip the ground to a ground on the circuit I'm testing. Each module on the chassis has it's own ground point.
As for the Pioneer, I can't, for the life of me, remember if the chassis hot. I should as I replaced the power cord and I made sure to get the phasing correct and use a polarized plug. Someone told me not to as I might need to reverse the plug if I get hum, but I never have and I thought that was more for externally connected like turntables, etc.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|