Thread: Motorola TS-4J
View Single Post
  #9  
Old 07-12-2018, 08:43 PM
Zsuttle's Avatar
Zsuttle Zsuttle is offline
VideoKarma Member
 
Join Date: Apr 2018
Location: Virginia Beach, VA
Posts: 159
Yeah, today I purchased new electrolytics for all but one of the caps.(The only two that tested good were either before the diodes, or not in the power circuit.) Since I elected to restuff, it should be fairly easy to replace them without unsoldering the whole can, just cutting and resoldering the leads. My parts store didn't have some of the values, so I'll have to make do with a few caps that are higher value (eg a 150uF instead of a 120uF) but it should be alright until I get permanent replacements.
__________________
"If it isn't broke, you aren't trying hard enough"

Last edited by Zsuttle; 07-12-2018 at 09:13 PM.
Reply With Quote