View Single Post
  #26  
Old 01-16-2017, 08:58 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,672
What you need is horz drive from IC340 pin 11
That goes to the optic isolator IC469.
VCC for IC340 pin 10 comes from T453 / D461
Hoz drive is a must have to run the PS.

Since unloaded it seems to be doing what it should
I would suspect over voltage shutdown. Maybe test the small
transistors by lifting 2 leads for accuracy.
BTW one of our distributors made up kits for these to fix
them after lightning. Worked 100%. IIRC had an isolator,
4 small transistors & a diode.

The similar C3 chassis had a lot of bad FBT's Symptoms
were dead set, HOT gets too warm, R460/461 get warm.

73 Zeno
LFOD !
Reply With Quote