|
Thanks for all of the advice guys. I haven't pulled out the scope yet but have some good news. I did the "color afc alignment" procedure which only requires a voltmeter and now I can get very weak color. The alignment settings were not really that far off, so I am not sure if I tweaked it just enough to get a weak color signal and there is still an issue somewhere.
There is only a color image at the counterclockwise end of the fine tuning of the channel. It is also pretty difficult to get the color and picture stable at the end of the range. I have had trouble getting the color bars to sync properly as well.
I have a portable color bar generator, see attachments.
|