Quote:
Originally Posted by Wind157
Shoot, thought I found the problem. Now to start checking capacitors
|
You fail to state if there's a light on the screen or noise in the speaker. If all the tubes light, there's no problem with the heater string. Outside of the tubes lighting, if there's no other indications regarding audio noise or screen illumination, the next place to go is to check for B+. It can be checked around the selenium rectifiers. It could something as simple as an open fusible resistor or a fuse in the B+ circuit. The selenium rectifiers are the units with the six metal plates. There should be two on the tube side of the chassis.
You have to determine where the original fault really lies.