I finally got all the tubes and fired the set up. The cap for the audio section is bad it hums like crazy so I just pulled the audio output tube for now. This is all I get on the screen. I did substitute one of the tubes in the tuner so I thought maybe that was the issue. So I took my pattern generator and hooked it up to the grid of the video output tube, and couldn't pass a signal through. I tried a few different tubes nothing made a difference. I'm just curious where I should look next I figure I could try to learn something from this before I just blindly recap it. If nobody has the schematics I could take some pictures of the Sam's I have. I didn't get the digital I bought a folder set off of eBay.
|