So I cleaned the contacts in the tuner, and it still had the same problem. The sync wouldn't lock in (H or V) until it warmed up a little, then it wouldn't lock in if I changed the channel unless I rotated the tuner around a few times or shook it a little bit. Adjusting the AGC didn't fix it either. Then I swapped out the 4HS8 sync separator tube, and that fixed it. ( I got lucky and had just one new one in my tube stash) Then I tested the old one and it barely moved the needle on my tester... I'll post some more pics after I clean it up some.
__________________
The quality goes in, before the cat goes on!!
|