|
I got really familiar with fuse resistors when I did audio repairs. Every pioneer and sansui that came in had so many blown fuse resistors. Gosh was that awful.. I'll check this set and try tracing the AC. I just figured the fuse would be obvious in a tv since they were supposed to be pretty user serviceable to an extent.
Making that part to hold the yoke is probably something I can't do myself, but if the chassis comes to life it'll be worth a shot.
There is another strange thing going on. There is a place in the set where two pins are sticking up with nothing bridging them, but it looks like something should be bridging them. On the little diagram it is the little cylinder part to the right of the tube with "16ohms hot, 175ohms cold" next to it.
Hey looking at the picture I think this is a 17P5, or at least something very close.
|