View Single Post
  #7  
Old 02-22-2017, 07:29 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by DavGoodlin View Post
I have two of these BK 467s, one from a shop closing and another from a swap meet. One has a dead filament supply and the other has G1 supply failure. both seem to have loads of cold solder joints.
That's probably what's wrong with my CR70 parts unit. It won't light the tube neck on any setting.

In my experience with test gear, taking a gamble on something that "powers on but is otherwise untested" usually pays off and is a very good bargain. It doesn't surprise me that the guy you got the B&K from was blowing smoke. No negative feedback from a swap meet.
Reply With Quote