Quote:
Originally Posted by TinCanAlley
That is on my list for tomorrow. You wouldn't happen to know how the pink lead is connected in the anode cap, do you? It looks like it is just pushed into the cap through the hole next to the anode lead.
|
I have never messed with anything that new, but in all that I have seen the clip is soldered to the HV lead. Grease up the lead where it enters the cup and push it further into the cup, while gently pulling the clip out of the cup. The clip should come out of the cup so that you can unsolder the wire and pull it out. Push the new wire in and solder to the clip, then pull it back so that the clip is seated in the cup as before.
jr