|
well here it is i still got a line across the screen and checked all voltages and seem just about right on and still cant figure why i just have a line. replaced both horiz and verticle ics and made no difference at all. this is baffling to me finding nothing else wrong but i know there is something. caps were changed checked diodes only to fine the one, i also took off some resistors and transistors to check out of the circuit and everything checks ok. and yes these components are SMD, chips very difficult to see let alone remove and put back. did anyone who reads this post have any info as to where to go from here with this problem. it seems to be a common problem with these little sets. HELP.........
|