Quote:
Originally Posted by andy
The plug is so that you can easily remove the chassis.
Just in case you don't know, you can remove the convergence panel, and mount it flipped up so that the controls are facing the front of the set for easier access.
|
Yep, I learned that from my brother. I said to him I thought it was an odd way to mount the controls and he said to flip it up so I can easily adjust while in front of the set. I was so busy wondering why it was mounted there I never thought about it being functional with a little movement.
I get it. You can take the chassis out and work on the bench. I've been flipping her over and it works for me. If I had a business going, I'd sure go the removal route.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|