|
I don't but my advice would be to look at the length to see likely spots for it to connect to, and use a magnifying glass to try and spot where the broken wires are poking out of some solder somewhere. You could probably trace the neg from the rectified AC and connect to a common trace.
It might be a mistake to use a low powered iron, as you have to dwell too long to get enough heat transfer to melt the solder, which will transfer into the PCB. A hot iron works better.
And yes, for those asking (albeit a while ago) Japan AM starts lower than 550, but I forget the exact number. I can only pick up 3 or 4 stations that are well away from the limits.
|