No IC sockets on this board. Flipping the setup switch on the back and forth a few times got me color, but it wouldn't sync. I had another 9-86-02 and so I tried swapping it in and it works, I have color now.
The picture looks a bit washed-out though, not enough contrast. Adjusting the 'picture' control all the way from one end to the other has no effect at all. I cleaned the control, I tried pulling the luma module in and out, making sure it was making contact, no effect. It's a 9-88-03, which I don't have.
__________________
The quality goes in, before the cat goes on!!
|