|
I apologize if I am preaching to the choir here. But, as with other equipment, it will work much better with at least the capacitors replaced in it. I only has a few capacitors, two 8 uFD filters and the odd ball is the 2uFD paper capacitor. That should be replaced with film capacitors. I have about three of four of these and when the parts were replaced, it reads very close to the value. There are resistors around the selector switch and often the first one (or others) drift high. That will most likely throw the readings off. I test the resistors and if they are high, they get replaced with all of the paper and electrolytic capacitors.
Do you have the manual for it?
|