Yeppers you guys are spot on about those. I've done both to this set and others. And I have worked on countless Sonys that spit the wedges out. One sure sign the yoke fell down is poor convergence and purity along with A vertically bowed and askewed picture. This set along with messing with the convergence ring and wedges on the yoke have been useless. It's as good as its going to get.
Quote:
Originally Posted by zenithfan1
Also, edge convergence can be slightly adjusted by adding/moving the deflection yoke wedges in or out or putting them in a new spot. I've been able to fix the corners on a few Sonys this way. Tape 'em down if you find a good spot, Sonys like to spit them out, I've found several just laying on the chassis over the years. LOL
|