View Single Post
  #79  
Old 02-08-2019, 10:06 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,506
Today I tackled the HV cage mod. I cut away the corner and made a triangular filler piece. Then cleaned it up and painted it a silver color. I wanted it a bit different color than the chassis.

I then finished up wiring the HV cage. I replaced all the HV wire, except the HV lead to the CRT.

Then I could finish up wiring in the Yoke wires. All done except the 300 Ohm twin lead from the Tuner to the terminals. Then on to first power up.





Reply With Quote