|
D and E-line flat chassis Zenith, vertical chassis CC2, 1st generation Zenith System 3 with the VRT power supply and 9-153 HV/sweep module. Yes, they had issues, but they were usually easy to resolve and a straightforward circuit.
PC-chassis GE. They saved the best for last and that chassis was used in 19" and 25" sets. Usually, a few capacitors would cure any problems that they had.
C1 and C2 chassis Magnavox sets. The T991, T995, and T815 were also decent, as long as you kept spare safety capacitors on hand and resoldered all of the module contacts.
Late '70s Quasar, after the Matsushita takeover. The ones from the '80s were not as good.
|