Quote:
Originally Posted by avalon1308
Hi All,
I have 3 set, 2 American ones and one European one, they all suffer from no HV,I have changed all the lytics in the sweep section but no difference, the horiz output transistor measures fine but gets very hot (2SC41). I do have a waveform at the collector at the correct frequency but seems to be distorted and too low.
since it is not easy to reach the components on the board, I am afraid that I will eventually break the PCB and the copper lines.
would someone happen to know if there is a common problem on all these sets. I find it strange to have the same symptoms on all of them. does the flyback transformer go on these sets, I have no means of measuring the transformer.
I would really love to have at least one of them going.
I thank you in advance for your help and advice.
dominique
|
I don't get into many of solid state sets but if they are old flybacks do go bad and humidity could be a cause along with resistors. Check resistor values around the horizontal transistor.