Quote:
Originally Posted by Pete Deksnis
Phil, the original 1956 RCA construction article for composite video inputs also included two circuits for the CTC4. The second might be the more useful as the other requires a 75-ohm composite signal. The second can be driven by typical consumer equipment composite video outputs, the yellow RCA connectors. The link (notice there are more inductors and caps in this-made-for-the-CTC4 design to develop the requisite curves):
http://antiqueradio.org/art/BROADCAST_NEWS_0656_4.jpg
Pete |
Now this is a tempting solution to my alignment troubles (which are at least as bad as Phil's)! I just found what I think is the correct tuning knob, and cleaned my bench enough to fit it so this may be god telling me to get back to my CTC-4...