Okay, well mixed news.
The new resistor (Replacing R119) fixed the power issue. I now have sound, video, and high voltage back.
Only problem: I've lost part of my vertical deflection. I also was hearing a clicking from the flyback, but I'm still getting HV and that seems to have stopped after I tightened a few screws on the HV cage. Not sure why that would fix it, but there we are.
So here's what I'm going to check:
- I'll verify that I'm getting the correct voltages out of the 3 sections of the
power supply. Perhaps they're too low.
- I'll verify my HV is high enough. Could that cause partial loss of vertical?
I know the yoke is okay, because in fiddling with the height I've been able to get the picture to bounce all the way down, but it almost immediately bounces back up.
I'm including a video as well. Perhaps someone can point me towards a suspect section?
https://youtu.be/D5siDbEAvU0