|
The 63-9897 is used in the 19EC13 chassis, and is featured in Tekfax 113, available over on World Radio History to the left on the ET/D (Electronic Technician/Dealer magazine page.
It's shown as R353, Focus Divider on page 152 of the Tekfax (or page 153, as indexed by Adobe Acrobat Reader). Two resistors shown, 200 Megohm and a 40 Megohm in series, tapped at the 40 Megohm.
Same page, in the parts list, R353 is listed as a 63-9897.
Just about all Zeniths back then had the 240Meg focus divider, tapped at 40Meg. Even when incorporated in a tripler (ECG523, ECG529, ECG530) - the focus resistor values stayed the same 200 + 40 Megs, tapped at the junction. The same ECG guide I mentioned earlier has the schematics of the triplers and a description of the HI-DIV focus dividers too. HI-DIV 1 and HI-DIV 3 are identical electrically, but mechanically different for the various chassis mounting consideration......in a pinch, either will do.
__________________
Brian
USN RET (Avionics / Cal)
CET- Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
|