View Single Post
  #8  
Old 04-02-2024, 03:22 PM
luRaichu's Avatar
luRaichu luRaichu is offline
NIGHT STALKER
 
Join Date: Mar 2024
Location: North America, I think?
Posts: 77
Quote:
Originally Posted by vol.2 View Post
it's in pretty rough shape by the looks of it. unfortunately, the commercial versions rarely have a sam's,
This model does have a Sams' but I'm not paying $22 for it. https://www.samswebsite.com/en/photo.../model/CT1310M
I should ask my library if they have Sams', I doubt they do though.
Quote:
Originally Posted by vol.2 View Post
would be a real shame to spend a bunch of time and money fixing up a set just to find it has a dim tube, etc
From what I've seen while the HOT was alive the picture tube is still good.

Image is monochrome because I accidentally had the 75Ω switch flipped on and ColorPilot off; the colorburst must've been decimated.
Image is blurry probably because of the above + focus was set wrong.

Here it is also with the 75Ω resistance on the composite signal but with ColorPilot on.
Quote:
Originally Posted by vol.2 View Post
but you might be able to find a consumer equivalent that has a fairly similar PCB in it.
There's likely a consumer set that uses the exact same PCB since mine has empty traces where tuning circuits would go.

Last edited by luRaichu; 04-02-2024 at 03:28 PM.
Reply With Quote