Quote:
Originally Posted by Electronic M
Rubbing alcohol is my favorite for the area around the NV connection on the crt, follow up with glass cleaner for a good shine. Remember there is a black aquadag coating as close as 2" to the HV connection. The dag needs to be there the dirt not so much...Telling them apart takes experience.
|
rubbing alcohol works for me. There is about a 1"by2" area missing DAG, I put a piece of electrical tape over it. DAG seems expensive. Do I need to buy some just to coat this small area? The reason I am cleaning the gunk near the HV is the occasional pops and hisses which I guess is the arkover.