View Single Post
  #5  
Old 01-04-2018, 10:23 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Electronic M View Post
Sam's usually has a proceedure for the horizontal. The vertical is not so much step by step as it is mess with height lin and centering simultaneously for best results....One thing you could try is pulling the vert sweep tube with brightnessat min so the line don't burn the screen vertically center the line then plug the tube back in and try to get height and lin dead on.

If you can't get vert linearity right with the screen filled/overfilled something is wrong with the circuits.

Monochrome sets were designed to have signifficant overscan (underscan = warranty complaint=lost profit) to compensate for fluctuations in house hold voltage and unregulated B+ supplies. So don't bother trying to get overscan down....Fighting the design limits is not a good practice.
BTW, how did your Predicta turn out. The one you bought last summer.
Reply With Quote
Audiokarma