|
If I remember right, there is a small electrolytic capacitor in a switch mode power supply that goes bad and it will not power up. If it is one of those that has the power supply on the right side toward the back of the unit where the power cord goes in, you can remove it, and recap it. If the fuse was blown then the switch mode SCR would be shorted, and it may have more problems. I'd try recapping it. Seems to me is just a little bugger, like a 4.7Uf or something kinda in the middle of the power supply that opens up and then the whole thing goes dead. Usually if I found one of those that had switch mode supply that was bad I recapped the whole thing.
|