Quote:
Originally Posted by zeno
Maybe I missed it but whats the chassis ## ?
IIRC the vert controls are on the module with little extention
shafts. If there is a large adjustment needed UNLESS the pot has
a bad spot or someone messed with it it HAS a problem.
You should do the vert next, it may cause more damage.
BTW your voltages are OK, its not unusual to tweek the
grey scale a little especialy an old set.
Be sure when doing your doing the final set-up the set has
run a few hours & is nice & warm.
73 Zeno  |
It's a 25EC58. The reason I want to adjust the sizing is I noticed that what I see on my 18 CC2 in the upper part of the screen is about 1" closer to the top or actually off the screen.
I got this set from someone that got it from a shop of sorts. It looks like they messed with things as I just noticed the deflection yoke clamp wasn't tightened down.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|